Cleaning
Cleaning
Cleaning after installation:
After laying: Construction dust (sand gypsum) is very abrasive. It should be removed to
avoid the danger of creating premature walking lanes. After vacuum cleaning, the
whole surface is wet cleaned with an injection extraction machine.
For soil: 90% of all dirt in a building comes in on footwear. For this reason, it is strongly
recommended to install and maintain an entrance matting at all the entrance outdoors.
For daily cleaning: It depends on soiling and the traffic frequency. Stains should always
be removed as soon as possible in order to avoid penetration into the floor/wall covering.
For daily maintenance: just wring the dry mop before using. Use clean, warm water. If
you have used a cleaning agent, rinse the floor afterwards and leave the surface dry
thoroughly. Alternatively, use vacuum. Preferably choose rotating brushes, neither
beater bar, nor vapor cleaner. For periodic cleaning, please get help from a
professional cleaning company.
Use cleaning agent only if needed.
Occasionally you can use acetone, citrus, Pine-Sol, strongly alkaline cleaning agents,
scouring powder or strong solvents, but using them too often will damage the floor.
Please try to use cleaning agents PG value around 7-8 often. Rinse and mop with at
least one additional clean water rinse after applying detergent, as detergent residue
will attract soil if not properly rinsed.